Product ID: P11149
flange DN25/PN40 - sensor length 140 mm - Ex-Zone 0/20 - PUR-cable
Do you have a question regarding sales processing, such as delivery conditions or delivery time? Click here for assistance.
Your contact person
Phone: 04346 41580
Would you like more technical details, application advice, a replacement for a competitor's model, tips on installation or would you like to discuss possible adjustments? Please contact us!
Your contact person
Phone: 04346 41580
TYPE | STS 111 K-L140 |
---|---|
Product ID | P11149 |
Medium | Water, oil |
Detection range water | 1 ... 100 cm/s |
Detection range Oil | 3 ... 200 cm/s |
Process connection | DN25/PN40 (EN 1092-1/05 A) |
Sensor length L | 140 mm |
Output | output with separate Amplifier |
Ex area uf use | installation in partition wall Zone 0/1, Zone 0, Zone 20 |
ATEX Certificate | TÜV 98 ATEX 1298 X |
Marking gas Ex for partition wall mounting | Ex II 1/2 G Ex ia IIC T6…T3 Ga/Gb |
ATEX marking gas | Ex II 1 G Ex ia IIC T6…T3 Ga |
ATEX Marking dust | Ex II 1 D Ex ia IIIC T125°C Da |
Maximum values | Ui = 13.65 V / li = 200 mA / Pi = 0.69 W / Ci = 0.45 nF / Li = 1.80 µH |
Temperature range in T6 | -20 ... 40 °C |
Temperature range in T5 | -20 ... 55 °C |
Temperature range in T4 | -20 ... 85 °C |
Temperature range in T3 | -20 ... 85 °C |
Temperature range dust-Ex | -20 ... 85 °C |
Start-up time typ. | 8 s (2 ... 18 s) |
Reaction time typ. | 2 s (1 ... 13 s) |
Compressive strength | 60 bar |
Material sensor touched by medium | stainless steel AISI 316 Ti |
Material housing | stainless steel AISI 316 Ti, brass |
Material Flange | AISI 316 Ti |
Protection [EN 60529] | IP 67 |
Electrical connection | 2 m PUR-cable, 4x0.25 mm² |
Associated amplifiers | SZAb 400 EX-GR, SZAb 400 EX-WR115, SZAb 400 EX-WR230, SZAb 400 EX-GA |
Note | probe with longer cable available on request |