STS 212 K
Product ID: P11152
- G1/2 screw-in sensor for flow monitoring in gaseous media
- ATEX approval for operation in Zone 0 and Zone 20
- ATEX approval for operation in Ex separation wall Zone 0/1
- Medium temperature up to 85 °C
- Corrosion-proof stainless steel housing AISI 316 Ti
- Immersion depth 65 mm
- 2 m fixed cable PUR
- Installation in T-piece or welding sleeve
- Needs ATEX certified amplifier with analogue or switching output
- Observe special conditions for safe use
G1/2 - sensor length 65 mm - Ex-Zone 0/20 - PUR-cable
Product request
Contact
Distribution
Do you have a question regarding sales processing, such as delivery conditions or delivery time? Click here for assistance.
Your contact person
Phone:
04346 41580
Technical support
Would you like more technical details, application advice, a replacement for a competitor's model, tips on installation or would you like to discuss possible adjustments? Please contact us!
Your contact person
Phone:
04346 41580
More about this product
Productdata
| TYPE | STS 212 K |
|---|---|
| Product ID | P11152 |
| Medium | air |
| Detection range air | 2 ... 25 m/s |
| Process connection | G1/2 |
| Sensor length L | 65 mm |
| Output | output with separate amplifier |
| Ex area uf use | installation in partition wall Zone 0/1, Zone 0, Zone 20 |
| ATEX Certificate | TÜV 98 ATEX 1298 X |
| Marking gas Ex for partition wall mounting | Ex II 1/2 G Ex ia IIC T4…T3 Ga/Gb |
| ATEX marking gas | Ex II 1 G Ex ia IIC T4…T3 Ga |
| ATEX Marking dust | Ex II 1 D Ex ia IIIC T145°C Da |
| Temperature range in T4 | -20 ... 70 °C |
| Temperature range in T3 | -20 ... 85 °C |
| Temperature range dust-Ex | -20 ... 85 °C |
| Maximum values | Ui = 13.65 V / li = 200 mA / Pi = 0.69 W / Ci = 0.45 nF / Li = 1.80 µH |
| Start-up time typ. | 10 ... 40 s |
| Reaction time typ. | 5 s (2 ... 30 s) |
| Compressive strength | 10 bar |
| Material sensor touched by medium | stainless steel AISI 316 Ti |
| Material housing | stainless steel AISI 316 Ti, brass |
| Protection [EN 60529] | IP 67 |
| Electrical connection | 2 m PUR-cable, 4x0.25 mm² |
| Accessories (in scope of delivery) | 2 x gasket G1/2 AFM 34 |
| Associated amplifiers | SZAb 400 EX-GR, SZAb 400 EX-WR115, SZAb 400 EX-WR230, SZAb 400 EX-GA |
| Note | probe with longer cable available on request |