UFGSa 075 Ex-L200
Product ID: P21240
This device has been discontinued! Replacement device: UF2GSa 075 Ex-L200
- Optical filling level monitor for use in Ex-zone 0 with resistant glass tip
- Ex Filling level monitor / filling level switch for the reliable monitoring of the maximum or minimum filling level of fluids
- Resistant materials: stainless steel and glass
- Detects fluids with a very low dielectric constant (DK value) such as oil
G3/4 - sensor length 200 mm
Product request
Contact
Distribution
Do you have a question regarding sales processing, such as delivery conditions or delivery time? Click here for assistance.
Your contact person
Phone:
04346 41580
Technical support
Would you like more technical details, application advice, a replacement for a competitor's model, tips on installation or would you like to discuss possible adjustments? Please contact us!
Your contact person
Phone:
04346 41580
More about this product
Productdata
| TYPE | UFGSa 075 Ex-L200 |
|---|---|
| Product ID | P21240 |
| Switching Point | -10 mm |
| Sensor length L | 200 mm |
| Output | output with separate amplifier |
| Ex area uf use | Zone 0 |
| ATEX Certificate | EPS 18 ATEX 1 097 X |
| IECEx Certificate | IECEx EPS 18.0054X |
| ATEX marking gas | Ex II 1G Ex ia IIC T6 Ga |
| IECEx marking gas | Ex ia IIC T6 Ga |
| Ambient temperature gas zone 0 T6 | -20 ... 60 °C |
| Ambient temperature gas zone 0 T5 | -20 ... 60 °C |
| Ambient temperature gas zone 0 T4 | -20 ... 60 °C |
| Ambient temperature gas zone 0 T3 | -20 ... 60 °C |
| Ambient temperature gas zone 1 T6 | -25 ... 70 °C |
| Ambient temperature gas zone 1 T5 | -25 ... 75 °C |
| Ambient temperature gas zone 1 T4 | -25 ... 75 °C |
| Ambient temperature gas zone 1 T3 | -25 ... 75 °C |
| Compressive strength (at 25°C) | 16 bar |
| Material sensor touched by medium | stainless steel AISI 316 Ti, glass |
| Material housing | stainless steel AISI 316 Ti |
| Seal material | FFKM (Kalrez) |
| Drehmoment | 100 Nm |
| Protection [EN 60529] | IP67 |
| Electrical connection | M12 connector |
| Accessories | plug M12, SBG-DC (Z01060) or SBW-DC (Z00038) |
| Associated amplifiers | IKMb 123 Ex... |