UF2GSa 075 Ex-L400
Product ID: P21254
- Optical filling level monitor for liquid media in hazardous areas
- Resistant in kerosene / motor fuels
- Installation in zone 0 (gas)
- 3-wire sensor, intrinsically safe
- Needs ATEX certified amplifier
G3/4 - sensor length 400 mm - M12 connector
Product request
Contact
Distribution
Do you have a question regarding sales processing, such as delivery conditions or delivery time? Click here for assistance.
Your contact person
Phone:
04346 41580
Technical support
Would you like more technical details, application advice, a replacement for a competitor's model, tips on installation or would you like to discuss possible adjustments? Please contact us!
Your contact person
Phone:
04346 41580
More about this product
Productdata
| TYPE | UF2GSa 075 Ex-L400 |
|---|---|
| Product ID | P21254 |
| Switching Point | -10 mm |
| Medium | liquid media |
| Process connection | G3/4 |
| Sensor length L | 400 mm |
| Ex area uf use | Zone 0 |
| ATEX Certificate | EPS 18 ATEX 1 097 X |
| IECEx Certificate | IECEx EPS 18.0054X |
| UKEX Certificate | EPS 23 UKEX 1 052 X |
| ATEX marking gas | Ex II 1G Ex ia IIC T6...T3 Ga |
| IECEx marking gas | Ex ia IIC T6...T3 Ga |
| Ambient temperature gas zone 0 T6 | -25 ... 75 °C |
| Ambient temperature gas zone 0 T5 | -25 ... 75 °C |
| Ambient temperature gas zone 0 T4 | -25 ... 75 °C |
| Ambient temperature gas zone 0 T3 | -25 ... 75 °C |
| Maximum values | Ui = 9.6 V / li = 50.5 mA / Pi = 121.3 mW / Ci = 3.54 nF / Li = 1.3 µH |
| Compressive strength (at 25°C) | 16 bar |
| Material sensor touched by medium | stainless steel AISI 316 Ti, glass |
| Material housing | stainless steel AISI 316 Ti |
| Seal material | FFKM (Kalrez) |
| Sensitivity | constant for all detectable media |
| Protection [EN 60529] | IP 67 |
| Electrical connection | M12 connector |
| Associated amplifiers | IKMb 123 Ex... |
| Note | Sensors with flange connection, tube fitting or different length are available on request. |