MFK 50 GSP
Product ID: P21193
- Filling level monitor for the reliable monitoring of the maximum or minimum filling level of fluids and bulk materials
- Detects numerous media with low DK value
- Non-sensitive to adhesion
- If the medium touches a frequency shift is triggered which generates a switching signal
- For the monitoring of fluids, such as oil, where capacitive sensors fail
G1/2 - sensor length 40 mm - Output PNP NO
Product request
Contact
Distribution
Do you have a question regarding sales processing, such as delivery conditions or delivery time? Click here for assistance.
Your contact person
Phone:
04346 41580
Technical support
Would you like more technical details, application advice, a replacement for a competitor's model, tips on installation or would you like to discuss possible adjustments? Please contact us!
Your contact person
Phone:
04346 41580
More about this product
Productdata
| TYPE | MFK 50 GSP |
|---|---|
| Product ID | P21193 |
| Switching Point | -6 mm |
| Output | switching output |
| Output function | PNP-NO |
| Supply voltage | 16 ... 30 V DC |
| Current consumption max. | 40 mA |
| Short circuit proof | 1 |
| Overcurrent release | 250 mA |
| Reverse polarity protection | ✓ |
| Voltage drop max. | 2 V |
| Switching frequency | 5 Hz |
| Ambient temperature | -20 ... 85 °C |
| For Media with minimum DK εr | > 10 |
| Compressive strength (at 25°C) | 16 bar |
| Material sensor touched by medium | PTFE |
| Material housing | stainless steel AISI 316 Ti, PBT |
| Seal material | NBR |
| Display | ✓ |
| Protection [EN 60529] | IP 67 |
| Electrical connection | M12 connector |
| Accessories | connecting cable SLG 3... or SLW 3... |