IKMb 123 Ex-230
Product ID: P31452
- For the connection of intrinsically safe sensors
- For top hat rail mounting in a switch cabinet in a non-explosive area
230 VAC - relay / changeover
Product request
Contact
Distribution
Do you have a question regarding sales processing, such as delivery conditions or delivery time? Click here for assistance.
Your contact person
Phone:
04346 41580
Technical support
Would you like more technical details, application advice, a replacement for a competitor's model, tips on installation or would you like to discuss possible adjustments? Please contact us!
Your contact person
Phone:
04346 41580
More about this product
Productdata
| TYPE | IKMb 123 Ex-230 |
|---|---|
| Product ID | P31452 |
| Output | switching output |
| Output function | relay / change-over |
| Supply voltage | 230 V AC +/- 10% |
| Switching voltage max. | 250 V AC / 60 V DC / 24 V DC |
| Switching current max. | 4 A AC / 0,8 A DC / 4 A DC |
| Switching Load | cos φ >0,7 / L/R ≤ 200 ms / L/R ≤ 200 ms |
| Rated voltage | 253 VAC |
| ATEX Certificate | EPS 17 ATEX 1 091 |
| IECEx Certificate | IECEx EPS 17.0047 |
| ATEX marking gas | Ex II (1) G [Ex ia Ga] IIC |
| ATEX Marking dust | Ex II (1) D [Ex ia Da] IIIC |
| IECEx marking gas | [Ex ia Ga] IIC |
| IECEx marking dust | [Ex ia Da] IIIC |
| Maximum values | Uo = 9.6 V / Io = 50.5 mA / Po = 121.3 mW / Co = 0.68 µF / Lo = 5.00 mH |
| Ambient temperature | -20 ... 60 °C |
| Display | LED Power: green / switching output: yellow / cable break: red |
| Protection [EN 60529] | IP 20 |
| Electrical connection | terminal screws |
| Note | area of use: only outside of the hazardous areas (gas or dust) |