EGE-Elektronik Spezial-Sensoren GmbH - Special-Sensors for Automation

3. 4. 2008

Compact flow controllers for pressurized micro flows

Gettorf - Sensor expert EGE expands its range of inline flow controllers by two new models featuring robust process connections.

Gettorf – Sensor expert EGE expands its range of inline flow controllers by two new models featuring robust process connections. Both new types are highly resistant to aggressive media and provide fast reaction times. The SDN 503 model detects flows between 1 and 200 ml/min and withstands pressure up to 10 bar. The SDN 504 DYN model is suitable for micro flow pulses from 0.02 ml/min onwards and pressures up to 20 bar. The sensor ensures e.g. the accurate lubrication of metal sheets before stamping or the minimal lubrication of bearings. Measured values are continuously monitored by internal electronics which also generate a switching signal should the flow pulses discontinue. The dwell time can be adjusted in a 0.5...10 s range. Moreover, an integrated LED display shows the current flow status.
Both units are fitted into pipes via a tube fitting or a G¼ thread. Due to their compact design, the sensors require little space: for parallel monitoring, several flow controllers can easily be mounted alongside each other. Based on the thermodynamic principle, they ensure wear-free and reliable operation.

EGE Strömungswächter Mikromengen / EGE flow controller micro flow

Figure: SDN 504 DYN sensors from EGE monitor micro flow pulses

« zurück zur Übersicht